Chapter 5: Commissioning the Tiller Pilot
51
Track data not received
This error message indicates that data has not been received. The most likely
reason is a cabling error – either open circuit, short circuit or wires reversed.
Track data error
This error message indicates that the navigator has lost its fix. Refer to the
navigator handbook for further action.
Checking the wind instrument interface
If you have connected the tiller pilot to a wind instrument, check the data link as
follows:
1. Press
standby
and
auto
together.
2. The tiller pilot should display a ‘W’ followed by the locked heading.
D3268-2
D3269-2
81130_5.book Page 51 Wednesday, June 15, 2005 3:48 PM
