Chapter 2: Advanced operation
27
2.3 How do I display boat data?
Use the
disp
button to show ‘data pages’ of SeaTalk or NMEA data:
1. Press
disp
to access the first data page, and press it again to cycle through
each data page in turn:
• when you cycle past the last data page, the display returns to the current
SmartPilot mode screen (for example, AUTO).
• 4 data pages are set in the factory as a default (see diagram): within User
setup you can select up to 15 pages and control the information they dis
play (see SmartPilot Commissioning Guide).
Notes: (1)
If the SmartPilot system cannot obtain the required information, the data
page will show dashes instead of a value.
(2)
The directiontosteer arrows relate to the data page information.
(3)
Most data pages show repeated data so you cannot adjust them: the
exceptions are the
RESPONSE
and
RUDDER GAIN
data pages,
which you can adjust using the
1
and
+1
buttons
Can I display Waypoint names?
If waypoints have been given names, the SmartPilot controller will display them
on the Cross Track Error (
XTE
), Bearing To Waypoint (
BTW
) and Distance To
Waypoint (
DTW
) data pages:
• waypoint names of five characters or less are displayed together with the
page name (as shown by screen
A
below).
• waypoint names of more than five characters alternate with the page name
(as shown by screen
B
below).
D5455-3
Autopilot mode
Data page 1
Data page 3
Data page 4
Data page 2
Default data pages
Press for 1 sec to
return to previous
data page
81283_1.book Page 27 Monday, October 2, 2006 2:03 PM
All manuals and user guides at all-guides.com
