10
Step 3 - Wiring the Joystick pod
The Pod connectors are color-coded, so ensure that each wire is connected to the
correspondingly-colored connector. Make the connections as shown below. Once
complete, replace the Pod cover.
1
Fit SeaTalk cable
2
Press Joystick interface cable into
cable
channel
3
Press SeaTalk cable into the cable
channel and arrange transducer
wires over it
4
Connect transducer wires
D6421-1
Red
Blue
Yellow
Green
Black
Red
Screen
Yellow
81227_2.book Page 10 Wednesday, November 2, 2005 10:51 AM
