8
Step 1 - Mounting the Joystick
The mounting surface must be smooth and flat to ensure that there is adequate
waterproofing.
1. Use the template provided at the rear of this booklet to mark the centers for
the fixing holes and outline of the body aperture.
2. Drill the fixing holes and cut-out the aperture for the body.
3. Peel off the protective paper from the rear of the weather gasket and fix to the
joystick.
4. Secure the joystick with the thumb nuts provided.
5. Plug in the interface cable to the base of the joystick
D6414-1
For
ward
81227_2.book Page 8 Wednesday, November 2, 2005 10:51 AM
