Raymarine RVX1000 Скачать руководство пользователя

Страница: 31 / 108

3.4 Software updates

The software running on the product can be updated.

• Raymarine periodically releases software updates to improve product performance and add

new features.

• The software on many products can be updated using a connected and compatible multifunction

display (MFD).

• Refer to

www.raymarine.com/software/

for the latest software updates and the software update

procedure for your specific product.

Important:

• To prevent potential software-related issues with your product, always follow the relevant update

instructions carefully and in the sequence provided.

• If in doubt as to the correct procedure for updating your product software, refer to your dealer or

Raymarine technical support.

Caution: Installing software updates

The software update process is carried out at your own risk. Before initiating the
update process ensure you have backed up any important files.

Ensure that the unit has a reliable power supply and that the update process
is not interrupted.

Damage caused by incomplete updates are not covered by Raymarine warranty.

By downloading the software update package, you agree to these terms.

Planning the installation

Содержание RVX1000













































































































Результаты поиска

Содержание RVX1000

Отзывы:

Похожие инструкции для RVX1000

Бренды по названию

Популярные бренды

Raymarine RVX1000, Руководство по установке

Результаты поиска

Содержание RVX1000

Отзывы:

Похожие инструкции для RVX1000

Бренды по названию

Популярные бренды