Raymarine RVM-100, Руководство по установке

Страница: 39 / 56

10.1 RealVision™ AHRS calibration
RealVision™ transducers include a built-in AHRS (Attitude and Heading
Reference Sensor), which measures the motion of your vessel to assist in
the rendering of sonar images. After installation all RealVision™ transducers
require calibration.
An uncalibrated transducer can produce an offset to the front edge of the
render of the bottom in the sonar image, as illustrated below.
Uncalibrated Calibrated
Calibration is an automatic process and starts after your vessel has turned
approximately 100° at a speed of between 3 –15 knots. Calibration requires
no user input, however at least a 270° turn is required before the calibration
process can determine the local deviation and apply a relevant offset.
The time it takes to complete the calibration process will vary according to the
characteristics of the vessel, the installation environment of the transducer,
and the levels of magnetic interference at the time of conducting the
process. Sources of significant magnetic interference may increase the time
required to complete the calibration process. Certain areas with substantial
magnetic deviation may require extra circles or “figure of 8” manoeuvres to
be performed. Examples of such sources of magnetic interference include:
• Vessel engines
• Vessel alternators
• Marine pontoons
• Metal-hulled vessels
• Underwater cables
Note:
In some circumstances, it is beneficial to disable Realvision AHRS if local
sources of magnetic interference are distorting the sonar image. Realvision
AHRS can be disabled from
[Settings] .
[Menu > Settings > Sounder > AHRS stabilization]
Note:
The Calibration process will require repeating after a [Sonar reset] or MFD
[Factory reset] .
10.2 Troubleshooting
The troubleshooting section provides possible causes and the corrective
action required for common problems that are associated with the installation
and operation of your product.
Before packing and shipping, all Raymarine® products are subjected to
comprehensive testing and quality assurance programs. If you do experience
problems with your product, this section will help you to diagnose and correct
problems to restore normal operation.
If after referring to this section you are still having problems with your
product, please refer to the
Technical support section of this manual for
useful links and Raymarine® Product Support contact details.
Sonar troubleshooting
Scrolling image is not being displayed
Possible causes Possible solutions
Sonar disabled Enable [Ping] from the Fishfinder app’s sounder tab:
[Menu > Settings > Sounder > Ping enable] .
Incorrect transducer
selected Check that the correct transducer is selected in the
Fishfinder app’s Transducer tab:
[Menu > Settings
> Transducer] .
System checks and troubleshooting
39