When “Individual Ship’s Call” is selected, Channel Display(Small) displays “In”.
When “All Ship’s Call” is selected, Channel Display(Small) displays “AS”.
5. After selection of All Ship’s Call”,when SCAN/MEM key(“DSC” key) is pressed,
the audible beep sound 1 is heard and the unit is ready to transmit “All Ship’s Call”
----
Æ
“TX” is flashing on the LCD which means that Transmission is ready.
----
Æ
Channel 70 is displayed at Channel Display(Large).
----
Æ
“AS” is displayed at Channel Display(Small) which means that the unit is in
All ship’s Call mode.
6. While “TX” is flashing, All Ship’s Call can transmit at 70CH by pressing
and releasing PTT key. Transmitter output power is limited to 1W.
7. After transmission,the unit will switch to 16CH of Working CH and DSC mode will
be exited.
When DSC mode is exited, ”DSC” will be eliminated.
Channel Display(Large) displays 16CH of Working CH..
Channel Display(Small) is eliminated.
(“Individual Ship’s Call” can transmit again by pressing PTT key)
5) Receiving All Ship’s Call
The receivable Channel is only 70CH. It can be done even in working CH, Monitor
mode and Scan mode.
When the unit receive the signal, the unit will become automatically “DSC” mode
1. When the unit receives “All Ship’s Call” at 70CH, Alarm tone will sound.
----
Æ
“DSC” is displayed which means the unit is in DSC mode.
----
Æ
Channel Display(Large) displays 70CH.
