Raymarine Q047, Руководство по установке

Страница: 17 / 24

Installing the socket
1. Apply the template (supplied at the rear of this handbook) to the
bulkhead.
2. Carefully drill a 18 mm (
23
/
32
in) clearance hole and two 2.5 mm
(
3
/
32
in) pilot holes. Remove the template.
3. Pass the cable through the bulkhead and attach to the socket,
making sure you connect each core to the correct pin
, as
described in the "ACU (control unit) connection" section .
4. Attach the socket to the bulkhead using the two self-tapping
screws. Use cable clamps to secure the drive cable at regular
intervals.
81131_8.book Page 60 Thursday, October 7, 2004 11:03 AM