Raymarine P70 Скачать руководство пользователя

Страница: 87 / 122

Item

Description

Options

Response level

This sets the default autopilot system response level setting. The

response level controls the relationship between course keeping

accuracy and the amount of helm / drive activity. You can make

temporary changes to response during normal operation.

Evolution

On Evolution autopilots the Response level setting is available from the

main menu:

Menu > Response Level

SeaTalk and SPX SmartPilot levels

• Level 1 — 3 Minimize the amount of pilot activity. This conserves

power, but may compromise short-term course-keeping accuracy.

• Level 4 — 6 Should give good course keeping with crisp, well

controlled turns under normal operating conditions.

• Level 7 — 9 Gives the tightest course keeping and greatest rudder

activity (and power consumption). This can lead to a rough passage

in open waters as the SPX system may ‘fight’ the sea.

Evolution

• Performance
• Cruising
• Leisure

SeaTalk and SPX SmartPilot

• 1 — 9
• 5 (default)

Off course alarm

This screen determines the angle used by the OFF COURSE alarm. The

OFF COURSE alarm operates if the pilot strays off course by more than

the specified angle for more than 20 seconds.

• 15° to 40°
• 20º (default)

Turn rate limit

This limits your vessel’s rate of turn under autopilot system control. It is

only effective if your speed is greater than 12 knots.

• 1° to 30°
• 7º (default)

Power steer

This screen determines the behavior of the Rotary or joystick when in

power steer mode.

Note:

Power Steer mode is only available if the system includes a

rudder reference transducer and speed data is available

• Off
• Proportional The steering will behave in proportion to the movement

of the rotary controller or joystick.

• Bang Bang (Joystick only) The rudder will move, and stay in the

direction a joystick is moved.

• Off
• Proportional
• Bang Bang

Hard over time

On vessels without a rudder reference transducer, it is of critical

importance to set the hard over time, to ensure accurate autopilot

operation.

The Default value is determined by Drive type selection.

• Value is seconds

Note:

* SPX and SeaTalk SmartPilots only.

Set up menu options

Содержание P70



























































































































Результаты поиска

Содержание P70

Отзывы:

Похожие инструкции для P70

Бренды по названию

Популярные бренды

Raymarine P70, Инструкция по установке и эксплуатации

Результаты поиска

Содержание P70

Отзывы:

Похожие инструкции для P70

Бренды по названию

Популярные бренды