Raymarine L1250D, Руководство пользователя

Страница: 166 / 246

7-22 HD Series Fishfinders
Sa
ving th
e Cu
rre
nt
R
out
e
6. To remove a waypoint from the New Route column, highlight the way-
point and press the
REMOVE WAYPOINT
soft key.
Note: The
INSERT WAYPOINT
or
REMOVE WAYPOINT
action adds/removes the
highlighted waypoint to/from the Route column, regardless of which column
is selected.
7. When all waypoints have been entered, press the
ACCEPT ROUTE
soft key
(or
ENTER
) to complete the route.
Note: The completed route is stored in the display unit and will be re-dis-
played if you turn the unit off then on again. However, on an integrated system
it is possible for a current route from another unit to overwrite this route. It is
therefore recommended that you save the route, as described in
Saving the
Current Route .
Saving the Current Route
You can save up to 20 named routes in the route database list. These routes can
then be re-displayed and followed at a later date. When you save the route, all
new waypoints are saved in the Waypoint List.
Note: If the current route has not been saved, when you attempt an operation
that affects this route (for example:
CLEAR ROUTE)
, you are prompted to save it.
➤
To save and name the current route:
1. To access the
SAVE ROUTE
soft key, press the
ROUTE
soft key, followed by
MORE
.
2. Press the
SAVE ROUTE
soft key. The save route pop-up and the
NAME ROUTE
soft keys are displayed as illustrated in Figure 7-6 .
3. The next available entry on the route list is highlighted.
(If desired, you can use the trackpad to select another position in the list.
This can be a blank slot or an existing route that you no longer require.)
REMOVE
WAYPOINT
ACCEPT
ROUTE
ROUTE
SAVE
ROUTE
81213_1.book Page 22 Monday, March 17, 2003 1:14 PM