Transducer setup menu
The
Transducer Set-up
menu enables calibration of connected transducers.
Menu item
Description
Options
iTC-5
Enables setup and calibration of transducers
connected using an
iTC-5
.
• Depth
• Speed
• Wind
• Rudder reference
• Compass
Depth
Enables setup and calibration of depth
transducers and provides the following options:
•
Details
•
Depth offset
Details
displays can supply information about
the installed transducer or interface such as
Serial No. and Software version etc.
Depth offset
allows you to set the offset
distance so that the displayed depth reading
represents the depth to the sea bed from either
the keel or the waterline.
•
Depth from:
– Keel
– Transducer
– Water line
•
Offset:
– 0 to 99 ft, m
•
About depth offset
Speed
Enables setup and calibration of speed
transducers and provides the following options:
•
Details
•
Speed calibration
speed should be
calibrated at each of the speed points shown
under speed calibration.
•
Calibrate water temperature
Details
displays can supply information about
the installed transducer or interface such as
Serial No. and Software version etc.
Speed calibration:
• speed settings are determined by the
calibration points stored either in the
transducer or the interface unit.
Calibrate water temperature:
• xxx ºC or ºF
Wind
Enables setup and calibration of wind
transducers and provides the following options:
•
Wind detail
•
Calibrate vane
•
App wind speed calibration
Details
displays information about the installed
transducer, Serial No. and Software version etc.
Calibrate vane
- follow the on screen instructions
to calibrate the wind vane.
App wind speed:
• xx kts
DST800
Enables setup and calibration of DST (Depth,
Speed, and Temperature) smart transducers
and provides the following options:
•
DST800 details
•
Depth offset
•
Speed calibration
•
Temperature offset
DST800 details
displays information about the
installed transducer, Serial No. and Software
version etc.
Depth offset
allows you to set the offset
distance so that the displayed depth reading
represents the depth to the sea bed from either
the keel or the waterline.
•
Depth from:
– Water line
– Keel
– Transducer
•
Offset:
– 0 to 99 ft
•
About depth offset
Setup menu
77
