Raymarine i60 wind, Инструкция по установке и эксплуатации

Страница: 28 / 76

4.8 SeaTalk connection
Connections to an existing SeaTalk system must be
made using a SeaTalk to SeaTalk ng® adaptor cable.
Basic SeaTalk system example
1 Wind vane transducer
2
i60 Wind ( SeaTalk ng® Wind instrument)
3 i50 Depth ( SeaTalk ng® Depth instrument)
4 i50 Depth ( SeaTalk ng® Speed instrument)
5 i70s ( SeaTalk ng® Multifunctional instrument
display)
6 SeaTalk ng® spur cables
7 SeaTalk to SeaTalk ng® adaptor cables
8 Speed transducer
9 Depth transducer
10 SeaTalk Course computer (providing 12 V dc
power to SeaTalk network.)
11 ST6002 ( SeaTalk pilot controller )
12 12 / 24 V dc power supply
SeaTalk power protection
The power supply must be protected by a 5 A fuse
or a circuit breaker providing equivalent protection.
Raymarine recommends that the power is connected
to a SeaTalk system in such a way that the current
drawn on each side of the power connection point
is equal.
4.9 NMEA 2000 network
connection
Your SeaTalk ng® device can be connected to a
DeviceNet / NMEA 2000 network.
1. SeaTalk ng® device
2. SeaTalk ng® to DeviceNet adaptor cable
(A06045)
3. DeviceNet T-piece
4. NMEA 2000 backbone
28