RayTech USB2 to hsb
2
Interface Box 5
1. Copy the file AIUSB.INF to the C:\WINDOWS\INF subfolder.
2. Copy AIUSBLDR.SYS and AIUSBDRV.SYS to the C:\WINDOWS\SYSTEM32\
DRIVERS subfolder.
3. Reboot the computer.
Note:
If you cannot view the listed subfolders under the Windows root directory, it may be
that they are hidden. From Windows Explorer, select TOOLS > FOLDER OPTIONS and click the
“Show hidden files and folders” radio button on the VIEW tab.
Network Configuration
Because the USB2 to hsb
2
Interface Box provides you with two separate hsb
2
network
connections, you can set up several different configurations:
Single Display
When you are integrating the RayTech PC with a single Pathfinder display, connect
the cables as shown in the following figure. Install a terminator at the end of the
hsb
2
cable where it connects to the display.
Multiple Units on a Single Network
You can connect multiple Pathfinder displays and DSMs by linking them together
with hsb
2
cables as demonstrated in the following figure. Install a terminator at the
end of the hsb
2
cable where it connects to the last unit on the network. Although the
following illustration only shows displays attached, you can also connect a DSM to
the network.
hsb
2
USB2
hsb
2
PLUS Series Display
Inteface Box Scanner
DC Power Supply
Distribution Panel
In-line
terminator
Raymarine
Power
10-36Vdc
PORT 2
PORT 3
RECON
STATUS
USB
PORT 1
