2 RayTech USB2 to hsb
2
Interface Box
RayTech USB2 to hsb
2
Interface Box
The Raymarine USB2 to hsb
2
Interface Box connects your PC to an
hsb
2
network, enabling
you to view RayTech data on all hsb
2
PLUS Series (Pathfinder) displays on the network. The
Interface Box provides a USB2 port for connecting to the PC and two internally terminated and
separate hsb
2
ports, which the Interface Box links into one contiguous hsb
2
network.
The PC is not required for proper operation of Ports 1 and 2 on the hsb
2
network.
T
he USB2 to hsb
2
Interface Box works with USB 2.0 only. If your PC does not have a
USB 2.0 port, you will need to install one using a PCI or PCMCIA USB 2.0 adapter.
The Interface Box does not work properly on a USB 1.x port.
IMPORTANT NOTE:
To use the USB2 to hsb
2
Interface Box you must ensure that
RayTech HSB2 configuration is set to USB2.0. This can be done when you run
RayTech Navigator. Select FILE > SETUP > INSTRUMENTS > HSB2 CONFIG >
USB2.0 FOR HSB2 NETWORK CARD.
Connector Panel
The USB2 to hsb
2
Interface Box connector panel provides the following connections:
•
POWER
connects to the DC power supply via the supplied power cable.
•
PORT 3
connects to the USB2 port in your computer via the supplied USB cable.
•
PORT 2
connects to Pathfinder display unit(s) and DSM(s) on the second hsb
2
network.
•
PORT 1
connects to display(s) and DSM(s) on the first hsb
2
network.
Note:
PORT 1 and PORT 2 are attached to separate networks. The Interface Box links these
into one contiguous hsb
2
network. hsb
2
connection cables must be purchased separately.
Raymarine
Power
10-36Vdc
PORT 2
PORT 3
RECON
STATUS
USB
PORT 1
