Raymarine e7D, Руководство по установке и эксплуатации, Страница: 230 / 270

Data sources menu
This menu enables you to select the external sensors and devices that will provide data to the display.
Auto / manual selection
Each dialog enables you to view and select your preferred data
source. selection of data source can be manual or set to automatic:
• Auto — the display will automatically select a device and attempt
to resolve any data conflicts that may occur where there is more
than one source of data for that particular data source (for
example, multiple GPS receivers).
• Manual — once the display has performed a search for connected
devices you can manually select the preferred device from the list.
Note: Selecting the Auto option may result in the system
choosing a source of data that you do not want to use.
Device selection
Menu item Description
GPS Enables you to search for any externally-connected GPS devices, and select the one you want
to use.
GPS Datum In order for your GPS receiver and multifunction display to correlate accurately with your paper
charts, they must be using the same datum. This option enables you to choose the data source
for this datum.
Time and Date Enables you to select the device you want to use for the time and date information used by the
display.
Heading Enables you to select the device you want to use for heading data.
Depth Enables you to select the device you want to use for depth data.
Speed Enables you to select the device you want to use for speed data.
Wind Enables you to select the device you want to use for wind data.
External devices menu
This menu enables you to configure the external devices connected to the display.
Menu item Description Notes
Fishfinder Set-up Enables you to select an external transducer and
configure the options for the unit, such as depth
offset. Also enables you to configure the options for
an internal or external DSM Digital Sounder Module. For an explanation of these options refer to the
Transducer set-up menu options described in the
Fishfinder section of this document.
Radar Set-up Enables you to make radar scanner adjustments,
such as tune adjust and time transmit. For an explanation of these options refer to the
Scanner set-up menu options described in the Radar
section of this document.
AIS Unit Set-up Enables you to configure additional functions for
AIS units, such as Silent Mode. This menu item is
only available when an AIS unit is detected or when
Simulator mode is On. For an explanation of these options refer to the AIS
menu options described in the AIS section of this
document.
Remote Control Enables you to customize certain controls for
Raymarine Bluetooth remote control units (for
example, RCU-3). For an explanation of these options refer to the
Remote Control section of this document.
Transducers Set-up Displays a list of connected transducers which you
can select and calibrate.
Connections menu
This menu enables you to connect wireless Bluetooth and WiFi devices to the display.
Menu item Description Options
Bluetooth Enable or disable Bluetooth on the display. • On
• Off (default)
WiFi Enable or disable WiFi on the display. • On
• Off (default)
230 e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127