Raymarine e7D, Руководство по установке и эксплуатации, Страница: 168 / 270

14.13 Fishfinder alarms
The display can be configured to provide a number of fishfinder
alarms.
The following fishfinder alarms can be set when a DSM is detected,
or when the simulator is on:
• Fish — alarm sounds when a target meets the specified sensitivity
level and, is within the depth limits (if enabled). The greater the
fish alarm sensitivity, the greater the number of target image
depths displayed.
• Fishfinder Deep — alarm sounds when the DSM detects that the
depth is greater than the deep limit.
• Fishfinder Shallow — alarm sounds when the DSM detects that
the depth is less than the shallow limit.
Setting up fish alarms
The fish alarms are configured from the alarms menu.
From the homescreen:
1. Select
Set-up .
2. Select Fish .
The Fish alarms menu is displayed.
3. Select Fish so that On is highlighted.
4. Select Fish Sensitivity .
5. Use the Rotary Control to adjust the fish sensitivity to the
required setting.
The greater the fish alarm sensitivity, the greater the number of
target image depths displayed.
6. Select Fish Depth Limits so that On is highlighted.
The shallow and deep fish limit settings will be activated in the
menu.
7. Select Shallow Fish Limit .
8. Use the Rotary Control to adjust the shallow fish limit to the
required setting.
9. Select Deep Fish Limit .
10. Use the Rotary Control to adjust the deep fish limit to the
required setting.
Setting up fishfinder deep alarm
From the homescreen:
1. Select
Set-up .
2. Select Alarms .
3. Select Fishfinder Deep .
4. Select Deep so that On is highlighted.
Selecting Deep will switch between On and Off.
5. Select Deep Limit .
6. Use the Rotary Control to adjust the setting to the required
value.
7. Press the Ok button to confirm value.
Note: The Deep Limit cannot be set to less than the Shallow
Limit.
Setting up fishfinder shallow alarm
From the homescreen:
1. Select
Set-up .
2. Select Alarms .
3. Select Fishfinder Shallow .
4. Select Shallow so that On is highlighted.
Selecting Shallow will switch between On and Off.
5. Select Shallow Limit .
6. Use the Rotary Control to adjust the setting to the required
value.
7. Press the Ok button to confirm value.
Note: The Shallow Limit cannot be set to greater than the Deep
Limit.
168 e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127