Raymarine e7D, Руководство по установке и эксплуатации, Страница: 108 / 270

Radar overlay
You can combine the chart with the radar and MARPA functions
to provide target tracking or to help you distinguish between fixed
objects and other marine traffic.
You can enhance the use of your chart by combining it with the
following radar features:
• MARPA.
• Radar overlay (for distinguishing between fixed and moving
objects).
Using the radar to view MARPA targets on the chart
The Mini Automatic Radar Plotting Aid (MARPA) function is used for
target tracking and risk analysis. When the radar overlay is on, all
MARPA targets are displayed in the chart window and associated
MARPA functions can be accessed via the chart.
Using radar overlay to distinguish between fixed and moving
objects
You can overlay radar image data over your chart image allowing
better distinction between fixed objects and other marine traffic. For
best results, switch on Radar-Chart synchronization to ensure radar
range and chart scale are synchronized.
Enabling radar overlay
With the radar turned on and transmitting, with the chart application
in 2D view:
1. Select
Menu .
2. Select Presentation .
3. Select Layers .
4. Select Radar so that On is highlighted.
The opacity bar is displayed showing the current opacity
percentage.
5. Use the Rotary Control to adjust the opacity to the required
percentage.
Accessing radar controls on the chart
From the chart application:
1. Select
Menu .
2. Select Radar Options .
Note: Any changes made to the radar options from the chart
application will be applied to the radar application.
Chart scale and radar range synchronization
You can synchronize the radar range in all radar windows with the
chart scale.
When synchronization is switched on:
• The radar range in all radar windows changes to match the chart
scale.
• ‘Sync’ is indicated in the top left-hand corner of the chart window.
• If you change the radar range, in any radar window, all
synchronized chart views change scale to match.
• If you change the scale of a synchronized chart window, all radar
windows change range to match.
Synchronizing the chart and radar range
In the 2D chart view:
1. Select
Menu .
2. Select Presentation .
3. Select Chart Sync .
4. Select Radar .
Note: Radar range synchronization is not available when the
chart motion mode is set to AUTORANGE.
NOWRad weather overlay
With a suitable weather receiver connected to your multifunction
display, you can overlay NOWRad weather information on the chart
display.
The NOWRad weather overlay provides NOWRad weather
information and reports in the chart application. You can adjust the
intensity of the overlay to achieve optimal visibility of both chart
and weather information.
Note: The NOWRad weather overlay can only be used in North
America and its coastal waters.
Enabling NOWRad weather overlay on the chart
In the 2D chart view:
1. Select
Menu .
2. Select Presentation .
3. Select Layers .
4. Select NOWRad so that On is highlighted.
Selecting NOWRad will switch the weather overlay On and Off.
Viewing weather reports from the chart application
In the 2D chart view:
1. Select
Menu .
2. Select Weather Reports .
3. Select Report At to switch between weather reports from Ship
or Cursor location.
4. Select either Tropical Statements, Marine Warnings, Marine
Zone Forecasts, or Watchbox Warnings.
Range rings
1 nm
2 nm
3 nm
D 11766-2
Range rings give you an incremental representation of distance
from your vessel to help you judge distances at a glance. The rings
are always centred on your vessel, and the scale varies to suit your
current zoom setting. Each ring is labelled with the distance from
your vessel.
Enabling range rings
In the 2D chart view:
1. Select
Menu .
2. Select Presentation .
3. Select Layers .
4. Select Range Rings so that On is highlighted.
Selecting range rings will switch range rings between On and Off.
3D Display Options
The following options are available with the chart application in 3D
view:
• Centre Of View — Switches a cross hair on and off at the centre
of the screen at sea level.
• Exaggeration — Adjusting the exaggeration has the effect of
vertically stretching objects on the chart, making it easier to see
their shape and position.
• Transducer Cone — Switches on and off a transducer cone
indicating the coverage of a fishfinder transducer.
• Depth Scale — Switches on and off a depth scale at your vessel
position.
108 e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127