Raymarine E12093, Руководство по установке

Страница: 22 / 40

Horizontal alignment
When viewed from above (as shown in the illustration above):
• the sensor arm must be between 75 mm (3 in) and 310 mm (12 in)
from the tiller arm
• with the rudder amidships, the sensor arm should be at 90° to the
connecting rod and directly opposite the cable entry point on the
sensor body
• when the rudder moves from hardover to hardover:
•
the sensor arm and the tiller arm must remain parallel to each
other at all times
• sensor arm movement must not /- 60°: if the steering
system drives the sensor arm beyond these limits it will
damage the rudder position sensor
Maximum
permitted
travel: +/- 60˚
Cable entry Parallel
Minimum: 75 mm (3 in)
Maximum: 310 mm (12 in)
90
˚
60
˚
60
˚
Min: 101 mm (4 in)
Optimum: 140 mm (5.5 in)
Max: 190 mm (7.5 in)
D5387-1
Mounting base
Tiller arm
or quadrant
Rudder position
sensor
Connecting rod
Ball joints (level)
Sensor arm
Parallel
Front view - rudder amidships
Top view - rudder amidships
Aft
81131_8.book Page 73 Thursday, October 7, 2004 11:03 AM
20