Raymarine AXIOM 2 XL, Руководство по установке

Страница: 63 / 108

16.1 Troubleshooting
The troubleshooting section provides possible causes and the corrective
action required for common problems that are associated with the installation
and operation of your product.
Before packing and shipping, all Raymarine® products are subjected to
comprehensive testing and quality assurance programs. If you do experience
problems with your product, this section will help you to diagnose and correct
problems to restore normal operation.
If after referring to this section you are still having problems with your
product, please refer to the
Technical support section of this manual for
useful links and Raymarine® Product Support contact details.
16.2 LED Diagnostics
The Display’s “Power swipe” key is illuminated using LEDs. The LED color and
flash sequence identifies the status of the display, along with any error codes.
LED indication Status and required action
(White) Powered up . Ok
Normal operation — no user action is
required.
(Red) Standby
Swipe to power up display.
(Blue) Recovery mode
Follow the power on reset instructions:
p.64 — Performing a power on reset
(Red flash: 1 a second) Low voltage
• Increase supply voltage to within
operating temperature range.
• Check power cabling and connections
for damage and corrosion; replace if
required.
LED indication Status and required action
(Red flash: 2 a second) High voltage
• Reduce supply voltage to within operating
temperature range.
(Red / Blue alternating flash) High
temperature
• Check display installation for adequate
ventilation and ‘free’ space around rear
of display.
• Check ambient temperature; if high,
consider powering down the display until
ambient temperature reduces.
Troubleshooting
63