Raymarine AXIOM 2 XL, Руководство по установке

Страница: 17 / 108

3.2 Additional components
Additional components are available for the Axiom® 2 XL range, which,
depending on your system, may be essential for certain features.
Note:
• Items 1, 2, 3 and 4 are available as an accessory pack (part number
T70431).
• Items 1, 2 and 3 are included with the display when ordering Axiom® 2
XL MFD kits (part numbers: T70545, T70546, T70547 and T70548).
1. RCR-SD/USB external card reader (part number: A80440).Axiom® 2 XL
displays do not have a built-in card reader. The following functions
require an external remote card reader to be attached to the display:
• Use of electronic cartography. Alternatively, cartography can be
shared from a networked display that has electronic cartography saved
to internal storage, or has a card reader attached.
• Updating product software. Alternatively, if your display has a
connection to the Internet, you can check online for software updates.
• Import and export user data (waypoints, routes and tracks).
Alternatively, user data can be imported and exported from a
networked display that does have a card reader attached.
• Backup and restore settings. Alternatively, settings can be backed up
and restored from a networked display that does have a card reader
attached.
• Viewing PDF files.
• Capturing and viewing screenshots or images (.png, .jpg files).
• Recording and viewing video files (.mov files).
• Installation of third-party LightHouse app (.apk files) (for installation
only; apps cannot be run directly from storage device).
In addition to the storage uses listed above, the USB slot on the
RCR-SDUSB can also supply 0.5A of current to charge mobile devices.
2. Alarm buzzer (part number E26033) An external alarm buzzer is required
to hear audible display alarms.
3. Alarm/analog video in (part number A80235) Cable is required to connect
the external alarm buzzer to the display. The cable also allows input of
an analog video signal, via a BNC connector.
4. GA150 GNSS antenna (part number A80288) If you intend to use
the Axiom® 2 XL’s internal GNSS receiver then an external antenna
is required. Alternatively, you can use another networked display or
external GNSS receiver to obtain a position fix.
5. DeviceNet to NMEA 0183 convertor (part number A80721) Data from
NMEA 0183 devices can be viewed on the display when the NMEA 0183
device is connected to the same NMEA 2000 / SeaTalkng ® CAN bus
network as the convertor.
3.3 Typical systems
The illustrations show typical system examples.
Note:
Power supply connection are not shown in the examples. For details on
how to connect power to your devices refer to the power connection
details in the instructions that were supplied with your devices.
Product and system overview
17