Raymarine Autohelm ST3000, Руководство пользователя

Страница: 62 / 77

Chapter 5: Commissioning the Wheel Pilot 57
5
Comm
issi
on
in
g the
Wh
eel
Pi
lo
t
To complete the compass correction:
1. Press and hold
STANDBY
for 1 second – a series of dashes will
cycle around the display.
Note: If you see a ‘CAL OFF’ message instead of the dashes,
calibration access has been prevented. Refer to page 66 for details.
2. Keeping boat speed below 2 knots, turn the boat in slow circles.
You should take at least 3 minutes to complete each 360°.
3. Keep turning your boat until the display changes to show the
amount of deviation the autopilot has detected. The deviation
alternates with the autopilot’s current heading every second.
Note: If the deviation exceeds 15° you should re-site the control unit
to a location less affected by magnetic interference.
SECOND
D5649-1
D5650-1
• boat's speed below 2 knots
• each complete circle should take 3 minutes
D3274-2
Current heading
Deviation
81194_1.book Page 57 Wednesday, July 25, 2001 12:10 PM