Raymarine Autohelm ST3000, Руководство пользователя

Страница: 57 / 77

52 ST3000 Wheel Drive Autopilot - Owner’s Handbook
4
In
st
al
lin
g
th
e Wh
ee
l P
ilo
t
Mounting on transverse bulkheads
If the steering wheel is mounted on a transverse bulkhead, you will
need to make special provision to mount the drive unit. You can
obtain as L-bracket (part number: D047) from your Raymarine dealer
to mount the clevis on the bulkhead as shown.
Note: You may also need to make a hardwood spacer to ensure
correct belt alignment with the wheel drum.
Alternative drive unit mounting positions
The wheel drive unit may be positioned on either the port or starboard
side of the wheel. The fluxgate compass is calibrated to give correct
steering sense when the drive unit sprocket is facing aft. Access to the
clutch lever is also easier when the drive unit is mounted this way
round.
However, if an obstruction prevents you from mounting the drive unit
with the drive sprocket facing aft, you can mount it with the sprocket
facing forward. In this case, you will need to re-adjust the motor drive
sense to regain correct steering – see page 53.
L-bracket
Hardwood spacer
D5647-1
81194_1.book Page 52 Wednesday, July 25, 2001 12:10 PM