Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide RFL-QCW150/1500
24
Table 9: Interface Commands
Code
Description
Examples
ABF
Aiming Beam OFF
Sent
：
“ABF”
Response
：
“ABF”
ABN
Aiming Beam ON
Sent
：
“ABN”
Response
：
“ABN”
DEABC
Disable External Aiming Beam Control
Sent
：
“DEABC”
Response
：
“DEABC”
DEC
Disable External Control– Disables the external control input
Sent
：
“DEC”
Response
：
“DEC”
DGM
Disable Gate Mode– Disables internal pulse generator.
Sent
：
“DGM”
Response
：
“DGM”
DLE
Disable Hardware Emission Control
Sent
：
“DLE”
Response
：
“DLE”
DMOD
Disable Modulation— Disables the modulation control input.
Sent
：
“DMOD”
Response
：
“DMOD”
DPM
Disable Pulse Mode
Sent
：
“DPM”
Response
：
“DPM
EEABC
Enable External Aiming Beam Control
Sent
：
“EEABC”
Response
：
“EEABC”
EEC
Enable External Control– Enables the external control input.
Sent
：：
“EEC”
Response
：
“EEC”
EGM
Enable Gate Mode—Enables internal pulse generator gated by signal
applied to modulation input.
Sent
：
“EGM”
Response
：
“EGM”
ELE
Enable Hardware Emission Control
Sent
：
“ELE”
Response
：
“ELE”
EMOD
Enable Modulation— Enables the modulation control input.
Sent
：
“EMOD”
Response
：
“EMOD”
EMOFF
Stop Emission— Stops emission.
Sent
：
“EMOFF”
Response
：
“EMOFF
EMON
Start Emission— Starts emission.
Sent
：
“EMON”
Response
：
“EMON”
EPM
Enable Pulse Mode
Sent
：
“EPM”
Response
：
“EPM”
RBT
Read Board Temperature— Reads the temperature of the laser's
control board. The response is an echo of the command, a delimiter of
“:” and the temperature in degrees centigrade.
Sent
：
“RBT”
Response
：
“RBT:36.6”
RCS
Read Current Setpoint—Reads the setpoint for the LD current. The
response is the command echoed back, followed by a delimiter of “:”,
and then the current setpoint in %.
Sent
：
“RCS”
Response
：
“RCS:56.7”
(Indicates that the LD current
setpoint is 56.7%)
