Raycus RFL-P500 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 27

Raycus RFL-P500 Скачать руководство пользователя страница 26

Wuhan Raycus Fiber Laser Technologies Co., Ltd.

User Guide of RFL-P500

22

4

When  the  laser  is  working,  the  cleaning
head  is  perpendicular  to  the  surface  of  the
material  to  be  processed,  resulting  in  a
large number of feedback light directly into
the optical module of the laser, resulting in
laser  damage.  This  alarm  can  only  be
repaired back to the factory.

Laser  cleaning  in  vertical  cleaning
is inefficient, and it is easy to cause
a  large  number  of  feedback  light
into  the  laser,  resulting  in  laser
burnout.

5

Dust and dirt exist in the protective lens of
the  laser  output  optical  cable.  The  light
output  before  cleaning  will  cause  the  laser
to  burn  out,  which  will  cause  the  laser  to
alarm and restart.

Check the output cable protective
lens before laser on.

In addition to the above, if there are any other questions or errors, please

contact

Raycus

to get help.

7

Warranty, Return and Maintenance

7.1

General Warranty

Raycus warrants that all Raycus fiber laser products are comformed to

applicable product specifications under normal use and are free from defects in

materials and work manship.

The warranties start on the date of shipment from Raycus for a period of time

as set forth in the applicable purchase contracts or product specifications. Raycus

has the right to choose to repair or replace any product that proves to be defective

in materials and workmanship selectively during the warranty period. Only

products with particular defects are under warranty. Raycus reserves the right to

issue a credit note for any defective products produced in normal conditions.

7.2

Limitations of Warranty

The warranty does not cover the maintenance or reimbursement of our

productof which the problem results from tampering, disassembling, misuse,

accident, modification, unsuitable physical or operating environment, improper

maintenance, damages due to excessive use or not following the instructions

caused by those who are not from Raycus. The customer has the responsibility to

understand and follow this instruction to use the device. Any damage caused by

«
...
24
25
26
27
»

Содержание RFL-P500




























Отзывы:

Нет отзывов