User’s guide Ytterbium Pulsed Fiber Laser RFL-P200 Ver.: 1.0
7
contact Raycus immediately if there is any missing item or evident damage to the unit. DO NOT
attempt to install or operate the laser, if there is any evident or suspected damage to the unit.
It is recommended that you do not discard the packing materials, as they will be necessary if you
ever need to ship the unit back for service at a later date.
CAUTION: The fiber optic cable and output head are precise optic
instrument, ANY vibration or impact to the output head, and twist or
excessive bend to the cable will damage the instrument.
2.5
Operation Environment
The operation conditions are listed in the table below:
Table 3: The Operation Conditions for the Laser
Power Capacity
≥
1200w
Installation Environment
Flat and no vibration
Ambient Temperature
10
℃
~40
℃
Relative Humidity
≤
70%
Weight
50kg
Water cooler
See section 3.2
It is recommended to install the product in an environment with air conditioning.
2.6
Precautions for Use
(1)
Make sure the instrument is properly grounded before you use it;
(2)
Make sure that the correct voltage of 220VAC power source is used. Failure to connect
power source correctly will damage the device;
(3)
There are no user serviceable parts, equipment or assemblies inside the product. All service
and maintenance shall be performed by qualified Raycus personnel. In order to prevent
electric shock, please do not break the seal or uncover the shield. Failure to comply with this
instruction will void the warranty;
