武汉锐科光纤激光技术股份有限公司
WUHAN RAYCUS FIBER LASER TECHNOLOGIES CO. LTD.
7
d） Please inspect the output head carefully for dust or other
contamination. Use appropriate lens paper to clean it if necessary.
Do not touch the output lens at any time;
e） Please cap the output head when it is not in use, and make sure the
cap is clean;
f） It is not allowed to install the output head when the laser is in
operation;
g） Do not look into the output head directly. Wear appropriate
protective eye glasses all the time when operating the laser;
h） Failure to follow the instructions may cause malfunction and damage
to the device, such damage is not covered by warranty.
2.6
Specifications
The specifications are listed in the following table.
Table 2
Product Specifications
Model
*
RFL-A200D/B/5/B/T
Max Power Consumption (W)
1200
Power Supply
48VDC±10%
Nominal Output Power(W)
>200
Output Power Instability
≤2%
Emission Wavelength(nm)
915±10
Red Guide Laser
650±10nm，0.25～1mW
Core Fiber (μm)
200
Fiber NA
0.22
Connect model
SMA905
Connect Port
DB25、DB9
Operation Mode
EXT control/RS232
Modulation Frequency (Hz)
50Hz～10KHz
Cooling Method
wind
Operating Ambient Temperature(℃)
0～30℃
NOTE：
*
RFL-A200D/B/5/B/T——code rule:
200——output laser power
B——wavelength 915nm
5——delivery cable length (m)
B——connect model SMA905
