武汉锐科光纤激光技术股份有限公司
WUHAN RAYCUS FIBER LASER TECHNOLOGIES CO. LTD.
12
Figure 5
The Power Cord of the Laser
1：+48V ；2：GND ；3：PE
2
Laser output
3
Status Leds
PO: power led
IN: interlock led
SI: signal led
LA: laser emit led
LD: laser error led
IO: LD driver alarm led
TM: temperature alarm led
TE: temperature controller alarm led
4
RS-232 serial port, this interface is a male DB9 connector, and will
be used in RS-232 mode.
5
Control Interface, a female DB25 connector, multiple function port.
3.2
Interface Definitions
3.2.1
Control Interface DB25
The definitions of the control interface are as follows:
Table 5
Control Interface Definitions
PIN
NAME
DESCRIPTION
1
In
input
Interlock plus signal
0V:enable
forbidden
2
EXT_Laser_EN
input
Enable laser output in
external mode
5V:enable
forbidden
