Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide RFL-A2000D-3000D Ver.1.0
10
3 Installation
3.1 Dimensions
Figure 1 shows dimensions of the product.
Figure 1: Dimensions of the Laser (unit: mm)
Note: The two interlock pins on the output terminal must be shorted before the laser is
turned on. Usually there are shorted contacts in the processing head, please check the head to
ensure that.
3.2 Installation Procedures
(1) Check if the power supply has the correct voltage (380VAC±10%
，
50/60Hz), and the earth
line is connected reliably.
(2) Place the laser firmly on the desirable position.
(3) Fix the casters at the bottom side of the laser.
(4) Check the output head and clean it if necessary. This procedure must be performed by
Raycus personnel or person authorized by Raycus.
