manualshive.com logo in svg

Rayco RG55T-R, Инструкция оператора, обслуживания и технического обслуживания, Страница: 35 / 74

Поделиться
Скачать
Rayco RG55T-R Скачать руководство пользователя страница 35

RG55T-R Operation • Service • Maintenance 

800.392.2686

35

Engine Identification

When contacting your certified Kubota dealer to service the 
engine, always specify engine model name, code number 
and serial number.
The engine model, code number and it’s serial number need 
to be identified before the engine can be serviced or parts 
replaced. The Engine Model Name and Number Label (1) 
has this information convenietly located on the engine as 
shown above. 
Note: Rayco recommends writing these numbers down 
inside all three manuals (Operator Booklet, Operator Service 
Maintenance Manual, Parts Manual) that are provided with 
your RG55T-R.

Maintenance

1

UNDERSTAND AND HEED TO THE 

INSTRUCTIONS LISTED IN THE SAFTEY 

SECTION OF THE MANUAL. IN IT’S ENTIRETY, 

BEFORE SERVICING THE MACHINE.

NOTICE

Park the machine on stable and level ground before 
service or maintenance is performed.

NOTICE

Let the temperature of the engine decrease before 
you start the job.

NOTICE

Stop the engine, remove the key, hang a DO NOT 
OPERATE tag at the operator station.

NOTICE

Do not make unauthorized modifications to the 
RG55T-R or the engine. This can cause damage, 
decrease engine life, void any warranty.

Содержание RG55T-R











































































Отзывы:

Нет отзывов