manualshive.com logo in svg

Rayco RG55T-R, Инструкция оператора, обслуживания и технического обслуживания, Страница: 27 / 74

Поделиться
Скачать
Rayco RG55T-R Скачать руководство пользователя страница 27

RG55T-R Operation • Service • Maintenance 

800.392.2686

27

Operation

Blade Transition for Transporting

The RG55T-R comes equipped with a 50 1/2” wide blade. 
For convenience of transporting through gates, or to load 
and unload on and off a trailer, the blade has wings (16) that 
can swing in to be only 34 1/2” wide. 

To swing the blade wings inward, pull the clevis pins (17) 
located on the back side of the blade. Simply turn the wings 
inward, reinstall the clevis pins at holes (18) located on top 
of blade to ensure they stay folded in.

Track Expansion / Retract

1.  Place machine on level ground
2.  Lift machine with blade and boom to elevate tracks
3.  Expand tracks to full 50” or retract tracks to less than 

36”

4.  Lower machine to ground 

18

16

17

TRACKS SHOULD BE EXPANDED TO 50” 

WIDTH AT ALL TIMES UNLESS REQUIRED 

TO REDUCE WIDTH TO GAIN ENTRY 

INTO A NARROW SPACE.  OPERATING 

MACHINE WITH TRACKS LESS THAN 50” 

WIDE INCREASES THE RISK OF MACHINE 

ROLLOVER.  MACHINE SHOULD NOT BE 

OPERATED WITH TRACKS LESS THAN 50” ON 

ANY UNEVEN TERRAIN. 

Содержание RG55T-R











































































Отзывы:

Нет отзывов