Rayco RG 1635A Скачать руководство пользователя страница 103 | Manualshive

Страница: 103 / 104

background image

RAYCO MANUFACTURING, INC.

PRODUCT WARRANTY

RAYCO Manufacturing, Inc. (“RAYCO”) warrants to the first user thereof that the products it supplies will be free from
defects in material and workmanship under normal and proper usage for a period of 180 days from the date of delivery
to the first user thereof, and in addition, with respect to “Miniwork Force” models, the main frame and control bar will
be free from defects in material and workmanship under normal and proper usage for a period of two years from said
date of delivery.

This Warranty does not cover and RAYCO makes no warranties with respect to (I) any product that has been subject to
abuse, misuse, misapplication, neglect, alteration or accident; to improper or incorrect repair or maintenance; or to
abnormal conditions of use, temperature, moisture, dirt or corrosive matter; and (ii) any materials, parts or other
components that are manufactured by someone other that RAYCO, which items carry only the manufacturer’s warranty,
if any. Furthermore, this Warranty does not cover expendable parts.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS,
IMPLIED OR OTHERWISE ARISING BY OPERATION OF LAW, TRADE, USAGE OR COURSE OF
DEALING, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OR MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.

All products designated as “used” are sold AS IS, WHERE IS, without any warranties.

Buyer shall provide RAYCO with written notice of any breach of this Warranty within a reasonable time after Buyer
discovers, or should have discovered, the alleged breach. Time is of the essence herein. this Warranty extends only to
the first user of the products and to no other person.

Any product alleged to be defective shall be returned promptly for examination to RAYCO or to another establishment,
as directed by RAYCO. No products or parts are to be returned to RAYCO without its prior authorization, and any
items returned to RAYCO shall be sent with transportation charges prepaid.

If a breach of this Warranty occurs, RAYCO will, at its sole option, repair any defective product or furnish a
replacement part or product or credit Buyer’s account.

THE REMEDIES SET FORTH HEREIN SHALL BE THE SOLE AND EXCLUSIVE REMEDIES AVAILABLE
TO BUYER SO THAT RAYCO’s REPAIR OR REPLACEMENT OR CREDIT OF BUYER’S ACCOUNT IS A
FULFILLMENT OF ALL OF RAYCO’s OBLIGATIONS. RAYCO SHALL NOT BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES OF ANY KIND, NOR UNDER ANY CIRCUMSTANCES
SHALL RAYCO BE LIABLE FOR DAMAGES BEYOND THE PRICE OF THE PRODUCT PURCHASED BY
BUYER, WHETHER IN CONTRACT, IN TORT OR UNDER ANY WARRANTY OR OTHER USE.

«
...
101
102
103
104
»

Содержание RG 1635A









































































































Отзывы:

Нет отзывов

Похожие инструкции для RG 1635A

Бренд: Rain Bird Страницы: 2

Бренд: Radarcan Страницы: 40

Бренд: Ecco Страницы: 5

Бренд: TATU Страницы: 30

Бренд: Rane Страницы: 4

Бренд: Sabio Страницы: 182

Бренд: Toro Страницы: 4

Бренд: Ugin Страницы: 39

Chandler Engineering 1910

Бренд: Ametek Страницы: 46

Бренд: ORORO Страницы: 16

Бренд: Gomaco Страницы: 30

Бренд: Nakayama Страницы: 6

COBRA CONTRA ANGLE Series

Бренд: Dabi Atlante Страницы: 20

Live Mix Pro 40-8

Бренд: DAPAudio Страницы: 43

Бренд: urbidermis Страницы: 2

Martin JEM ZR Series

Бренд: Harman Страницы: 32

LoRaWAN US 902-928

Бренд: Adeunis RF Страницы: 27

Programma Sverker 750

Бренд: Megger Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды