Raycer RAY45PCS-1, Инструкция по эксплуатации, Страница: 6 / 21

6
rebound forces can be controlled by the operator, if appropriate precautions are taken. Do
not allow chain saw to start.
•
Do not stretch the arm too far and do not cut above the shoulder height. This helps prevent
unintentional end contacts and allows better control of the chain saw in unforeseen
situations.
•
Use only the manufacturers specified replacement guides and chains. Incorrect
replacement guides and chains may cause chain breakage and / or rebound.
•
Follow manufacturer's instructions for sharpening and servicing the chain saw. A decrease
in the depth gauge level can lead to an increase in rebounds.
Residual risks
Even if you use this product in compliance with all safety requirements, the potential risks of
injury and damage remain. The following hazards may arise in the structure and design of this
product:
•
Always be vigilant when using this product, so you can recognize and manage the risks
rather.
•
Rapid intervention can prevent serious injury and property damage.
•
Turn off and unplug the tool if there are any malfunctions. Have it checked by a qualified
professional and have repairs carried out, if necessary, before using it again.
•
There are harmful health consequences resulting from the emission of vibrations if the
product is used for long periods of time or not properly managed and properly maintained.
•
There is risk of injury and property damage due to attachments or broken the sudden impact
of hidden objects when using cutting.
•
Risk of injury to persons and property caused by flying objects.
•
Prolonged use of this product exposes the operator to vibration and can produce so-called
"white finger" disease. To reduce the risk, wear gloves and keep your hands warm.
•
If any of the symptoms of "white finger syndrome" occur, seek immediate medical attention.
Symptoms of the "white finger" include numbness, loss of sensitivity, tingling, tingling, and
pain, loss of strength, colour changes or skin condition. These symptoms usually appear
on the fingers, hands or wrists. Risk increases at low temperatures.
•
Risk of loss hearing in case of prolonged used and when a hearing protection is not worn.
Symbols
Symbol warning of a warning
Read and refer to these operating
instructions
Wear safety equipment that
includes a helmet, protective helmet and
protective goggles
Guarantee sound power level
The contact of the end of the bar
with any object must be avoided.
Do not operate the tool with
one hand. Always hold it with both hands.
Wear protective gloves
Wear protective foot wear.