Rawlplug R-WW90II, Руководство по эксплуатации

Страница: 4 / 70

www.rawlplug.com
7
www.rawlplug.com
6
WW90 II WW90 II
NAILER
Model R-WW90II (AG3490)
Weight 3,8kg
Dimensions (D/S/W) 394x121,4x407mm
Nailing energy 104J
Nail lenght 50-90 mm
Joining angle 34 o
Nail diameter 2,87-3,3mm
Fastening speed per second 2-3
Fastening speed per hour 1200
Operating temperature range 7
o
C- 49
o
C
CHARGER
Model SP-WW90II/SC40II-CH-00
Input voltage range 100-240 VAC
Supply frequency 50/60 Hz
Charging voltage 8,4 V
Charging current 2 A
Charging time 75 min. (max.)
Protection class II
Tightness class IPXO
Electrical safety class II
BATTERY
Battery type PBP2A66D1
Battery capacity 2,5Ah
Voltage 7,2V
Fixings per charge 8000
FUEL CELL
Index R-RAWL-GP6
Mixture type liquid propane butane
Recommended working -5-25 degrees Celsius
Full charge <0,15A
CHARGER INPUT PARAMETERS
Index SP-WW90/SC40II-CH
Input Voltage Range 100-240 VAC
Input Frequency 50/60 lub 50-60 Hz
Inrush Current 40A maks. (Cold Start)
TECHNICAL DATA
GENERAL PARAMETERS
Efficiency 75%
Leakage Current 0,35mA max
Pre-Charge Current 0,15A - 0,25A
Pre-Charge Voltage 4V < V battery <6V
Complete Charge 2A
Constant Voltage 8,2V - 8,4V
Complete Charge <0,15A
Total Charge Time 2 Hours max
Overvoltage Protection 8,5V
Work Temperature 0°C - 50°C
Battery Pack Temperature Protection T < 0°C or T > 55°C
Continuous Output Power 17W max
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range 0°C to 50°C
Temperature Coefficient ±0.02%/°C
Storage Temperature Range –20°C to +85°C
Humidity, Non-Condensin 0 to 95% RH
Cooling Free-Air Convection
EMI Meets CISPR22 Class B Standard
Safety Specifications UL1310 & IEC60335-2-29
INFORMATION ON THE NOISE AND VIBRATION LEVEL
Noise measurement values were determined in accordance with EN62841. Typical for a given device,
The noise level emitted by this device, determined according to scale A, is standard:
Sound pressure level L
pA
102,4 dB
Sound power level L
WA
102.8 dB
Measurement error K
pA
and K
WA
2,5dB
Wear hearing protection!
Total vibration values ah (vector sum of three directions) and measurement uncertainty K marked
according to EN60745 are:
ah 2,48 m/s
2
K 1,24 m/s
2
The vibration level specified in this manual has been measured in accordance with the EN standard
60745 measuring procedure. The vibration level is representative for basic applications dedicated for
power tool. If the power tool is used for other applications or with other tools
and if it is not sufficiently maintained, the vibration level may deviate from specified. The above remarks
also apply to accessories. To provide adequate protection the user against additional effects of vibration to
ensure the safety warm hands while working.
USING THE TOOL AS INTENDED:
The RAWLPLUG R-RAWL-WW90II gas powered nailer is a professional tool, powered by the energy created by burning a
gas and air mixture, and it is only intended for fixing wooden elements with nails. Thanks to the gas containers and the
battery pack the device features, it is fully portable. The power tool and its accessories may only be used as intended
and designed for, in accordance with this operation manual. Using them otherwise is impermissible. The manufacturer
shall not be held liable for any damage or injury resulting from unintended use of the tool, failure to observe the
relevant safety regulations as well as the recommendations provided in this operation manual.
EN EN