Raw Thrills Space Invaders Frenzy, Руководство оператора

Страница: 18 / 55

Space Invaders Frenzy™
18
| P a g e
Cabinet Assembly Instructions
1. Place control (gun) cabinet in front of LED display.
2. Locate the two connecting brackets and the following hardware: (6) black tamper proof Torx
machine screws, ¼-20 thread, 1-1/2” long, and (6) ¼” black split lock washers, and (6) ¼” black
flat washers. Using a T-27 bit, attach these connecting brackets to the inside of each cabinet
side as shown in the cabinet assembly setup diagram.
3. Move pedestal assembly in front of control (gun) cabinet and connect harness. Locate the
following hardware: (6) black tamper proof Torx machine screws, ¼-20 thread, 1-1/2” long, and
(6) ¼” black split lock washers, and (6) ¼” black flat washers. Push cabinet halves (seat and gun
section) completely together and be sure not to pinch wire harness. Using T-27 bit, connect the
two cabinet halves with the hardware as shown in the cabinet assembly setup diagram.
4. Locate the following hardware: (2) black tamper proof Torx machine screws, ¼-20 thread, 2”
long, and (2) ¼” black split lock washers, and (2) ¼” black flat washers. Install screws through
pedestal floor to center connecting bracket.
5. Move the completed cabinet assembly into the desired position in front of the display. Raw
Thrills recommends a minimum distance of 100 inches total depth from back of LED wall base
legs to the back of the seats.
6. Connect the network CAT 5 cable between the back of the completed cabinet at the terminal
near the on/off switch and the back of the LED wall assembly. Use supplied D-channel sleeve
and carpet tape to properly dress the network cable on the floor.
7. Attach Marque Power Supply to frame and plug in the connector from marquee to marquee
power supply.
Startup Game
1. Plug in line cord to AC outlet.
2. Turn the power switch to ON.
3. Verify game display, sound, lights and controls are operating normally.
If not, turn off AC power and disconnect line cord. Refer to the diagnostic section of this manual.