Raw Thrills Space Invaders Frenzy, Руководство оператора

Страница: 36 / 55

Space Invaders Frenzy™
36
| P a g e
Problem Possible Cause Solution
No Video
PC not turned on.
Turn PC power switch on.
Ensure IEC cable tightly plugged
in. Trace cable back to source to
ensure continuity.
Video cable not secure.
Check and secure DVI connector
to LED controller card. Check
and secure DVI or HDMI
connector to PC.
Network cable missing or not
secure between cabinet and LED
screen.
Connect network cable between
RJ45 Network jack on the back
of the cabinet and quadrant #1
of the LED screen. Power cycle
the game after connecting the
network cable.
Network cable missing or not
secure between LED controller
card and RJ45 Network jack.
With the cabinet AC power off
and the line cord removed,
check the Ethernet cable
between the LED controller card
(Port “U”) and the RJ45 Network
jack on the inside of the cabinet.
Faulty RJ45 pass-through
Network jack.
Replace jack.
Connect RIO Board or RIO Board
Missing.
USB cable disconnected.
Check USB connection from PC to
RIO board.
No Power to RIO board.
Check for proper voltage (+5V,
+12V) at RIO P1 connector.
Dongle Not Present
Dongle missing or disconnected. Find dongle cable and reseat in
USB port.
Faulty USB port.
Insert dongle cable in different
USB port.
Defective single pixel.
Defective LED module.
Tap gently on defective pixel.
Replace LED module.
Several Defective pixels, but not
all in same row or column.
Defective LED module. Replace LED module.