Ravpower RP-WD03, Руководство для продвинутых пользователей

Страница: 110 / 124

110
Batter y Bac kup
FileHub RP-WD03 has an internal 6000mAh battery, so you can use it to
charge your devices on the go.
Charge FileHub
Start charging the FileHub when the remaining power is below 25%. This
will ensure your external charger is ready for emergency situations.
To charge the unit:
1.
Connect the USB end of the USB cable to an AC adapter or any USB
power source;
2.
Connect the micro-USB end of the cable to the charging port of the
FileHub;
3.
The power indicators will blink during the charging sequence. Once
the unit is fully charged, the blinking will stop and the indicators will
remain lit until the cable is.
We recommend using a USB AC adapter with up to 1.0A output to
charge the FileHub. Using a charger with an output higher than 1.0 A will
damage the internal battery more or less.