4
1.
Profile
- The machine profile contains configuration
settings for specific vehicles, when created by the user.
2.
Current Heading
- The current heading of the vehicle in
compass degrees.
3.
Speed
- The current speed of the vehicle. CAN or GPS.
4.
Map Area
- Information that is associated with the current
tab.
5.
Tabs
- Used to access the features, functions, and screen
displays for the Viper console. Press a tab to access.
6.
Application Rates
- Target Rate (R
T
) and Actual Rate (R
A
).
Press in this area to set or change rates (Available for
CAN systems only).
7.
Booms
- Booms turn green when on, gray when off. Press
in this area to configure AccuBoom Control.
8.
AutoBoom
- A’s turn green when on, gray when off. Back-
ground turns red if there is an error condition. Press in
this area to configure AutoBoom Control.
9.
GPS Status Indicator
- Status of the DGPS receiver
displays in this area. Press this area for additional GPS
information.
10.
Product Control Status
- Product Control Status of the
Raven console or the Raven CAN system displays in this
area. Press this area to modify Product Control settings.
11.
Display Data
- Status of CAN Tally Register. Press this
area to view the CAN Tally Register data. Press the area
again to hide the data.
