Raven Unverferth NutriMax Series, Руководство по установке и эксплуатации

Страница: 37 / 44

CHAPTER
6
P/N 016-4001-133 Rev. B 33
CHAPTER 6
TROUBLESHOOTING
TROUBLESHOOTING
NODE
The CAN control node features several green light-emitting diodes (LEDs) which may be used to diagnose issues
within the Steerable Hitch system.
NOTE: If the LEDs are not displayed as outlined in the figure below or are all on continuously, check the CAN
connections and the control cable connections on the node. If the issue persists, contact your local
Raven dealer for additional technical support.
FIGURE 1. CAN Control Node LEDs
HC (High Current) Power - Lit when
High Current Power is supplied to the
node.
Micro 1 Hz - Flashes once every
second when CAN communication is
active between the node and the
console. Flashes five times a second
when CAN communication is inactive
between the node and console.
CAN Rx - Flashes to indicate CAN
messages are being received by the
node. This light typically flashes
rapidly.
CAN Tx - Flashes to indicate CAN
messages are being transmitted from the
node. The flash speed of this light varies.
Diag 1 - Lit when the node is receiving
speed on the CAN bus or directly from a
speed sensor.
Diag 2 - Lit when the proximity switch
is active.
Logic Power - Lit when +12V current
is supplied to the node