manualshive.com logo in svg

Raven Unverferth NutriMax Series, Руководство по установке и эксплуатации

Поделиться
Скачать
Raven Unverferth NutriMax Series Скачать руководство пользователя страница 10

C

HAPTER

 2

6

Unverferth NutriMax™ Applicator ISO Steerable Hitch Installation & Operation Manual

HYDRAULIC FITTINGS

This manual may reference the following types of hydraulic fittings:
• SAE O-ring fittings
• ORFS (O-Ring Face Seal) fittings
• JIC fittings

UPDATES

Software and manual updates are available on the Raven Applied Technology website:

http://www.ravenhelp.com

KIT CONTENTS

This section contains a list of the components that are included in the Steerable Hitch kit. Before beginning the 

system installation, compare the items in the Steerable Hitch kit with the components on this list.  

At  Raven  Industries,  we  strive  to  make  your  experience  with  our  products  as  rewarding  as

possible. One way to improve this experience is to provide us with feedback on this manual.

Your feedback will help shape the future of our product documentation and the overall service we

provide. We appreciate the opportunity to see ourselves as our customers see us and are eager

to gather ideas on how we have been helping or how we can do better.

To serve you best, please send an email with the following information to

[email protected]

-Unverferth NutriMax™ Applicator ISO Steerable Hitch Installation & Operation Manual

-P/N 016-4001-133 Rev. B

-Any comments or feedback (include chapter or page numbers if applicable).

-Let us know how long have you been using this or other Raven products.

We will not share your email or any information you provide with anyone else. Your feedback is

valued and extremely important to us.

Thank you for your time.

JIC fitting (M)

ORFS fitting

SAE O-ring fitting

Содержание Unverferth NutriMax Series













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды