Raven SmartRow, Руководство по установке

Страница: 15 / 26

Manual No. 016-3001-002 11
Electric Clutch Systems Installation
3
Installing the Remote Switch
Parts Needed for this Procedure
To Install the Remote Switch
1.
Refer to the Remote Switch Assembly kit instructions.
Note:
SmartRow will control clutches and generate coverage map on a console, only when the
switch is activated. Be sure to mount the switch to accommodate varying field conditions
and planting depths to ensure the switch will always be activated during seeding.
2.
Locate a suitable mounting location for the remote switch, so the switch is activated when the
planter is in the ground.
Suggested Remote Switch Mounting Locations:
•
Toolbar raise/lower cylinder linkage.
FIGURE 3.
8500 White Toolbar Cylinder Linkage
Component Part Number Quantity
Remote Switch Assembly 063-0172-967 1