![background image](http://html.mh-extra.com/html/raven/smartrax-md-series/smartrax-md-series_installation-manual_789005029.webp)
P/N 016-5030-051 Rev. B
25
Node and Wiring Installation
4.
Route the foot switch cable to the node mounting location.
Install the Node Harness
FIGURE 8.
Node Harness Installed on SmarTrax Node
1.
Install the two large, rectangular connectors of the node harness (P/N 115-4001-157) into the correct ports
of the node (P/N 063-4001-013), tightening the bolts on the connectors to secure the connections.
2.
Tighten the bolts on the harness connectors to secure the connections.
3.
Connect the female 4-pin Deutsch connector to the cable of the installed foot switch (P/N 063-0173-593).
4.
Connect the node harness to the operator presence switch, if applicable.
a.
Locate and disconnect the machine’s existing OPERATOR PRESENCE connection behind the
operator’s seat, if applicable.
b.
Connect the round 4-pin connector from the node harness to the machine’s mating OPERATOR
PRESENCE connector.
FIGURE 9.
Mechanical Drive Connection
5.
Connect the 8-pin Deutsch connector from the node harness into the 8-pin port of the mechanical drive
(P/N 063-4001-010).
Содержание SmarTrax MD Series
Страница 2: ......