![background image](http://html.mh-extra.com/html/raven/smartrax-md-series/smartrax-md-series_installation-manual_789005028.webp)
Chapter 4
24
Case IH AFX/X230 Combines, Windrower WD/WDX & New Holland CR/CX Combines, Windrower H/HW Series SmarTrax™ MD Installation Man-
Mount the SmarTrax MD Node - Case IH Windrower WD/WDX
and New Holland H/HW Windrower Only
FIGURE 6.
SmarTrax MD Node Installed
1.
Install the SmarTrax MD node (P/N 063-4001-013) on the node mounting bracket (P/N 107-0172-084) using
three 3/8”-16 zinc flanged lock nuts (P/N 312-1001-167).
2.
Secure the node mounting bracket to the floor to the right of the operator’s seat using four #10-24 x 3/4”
self-tapping screws (P/N 310-1002-073) and 0.265” ID x 0.505” OD x 0.060” thick washers (P/N 313-2300-
120) or 3” double-sided tape (P/N 332-0000-019).
Install the Foot Switch
FIGURE 7.
Foot Switch Installed
1.
Select a suitable location for the foot switch (P/N 063-0173-593) to be installed.
Note:
The foot switch should be installed in a location where the operator has easy access to it and is
able to fully press the pedal.
2.
Using the holes in the foot switch as a template, drill holes in the floor of the cab.
3.
Secure the foot switch to the floor by installing the supplied screws in each of the mounting holes.
Содержание SmarTrax MD Series
Страница 2: ......