Raven SC1, Руководство по установке

Страница: 23 / 42

Installing the Disc System: Disc Leg Mounting 19
INSTALLING THE DISC SYSTEM
DISC LEG CONFIGURATIONS
The following configurations are available for disc steering systems:
•
Single Disc Steering Set
• Dual Disc with Mechanical Track Rod
• Dual Disc with Hydraulic Track Rod
NOTE: When a dual disc is used, a single hydraulic cylinder with a mechanical track rod is the preferred
configuration. A dual cylinder hydraulic track rod configuration should only be used if a mechanical
track rod is not possible with the structure of the implement.
NOTE: The disc or discs should cut to a depth of about 3-5 cm, depending on the type and humidity of the
soil. If the soil has already been ploughed to a depth of 15 cm, this means that the disc should cut to
a depth of 20 cm.
IMPORTANT: Check the working depth and prevent the disc from cutting too deep into firm soil.
DUAL DISC WITH MECHANICAL TRACK ROD
FIGURE 2. Dual Disc Steering Set with Mechanical Track Rod
Take account of the working depth of the disc and the position of the disc leg in the attachment. The disc legs are
provided with multiple holes in order to finely adjust the required working depth.
IMPORTANT: Construct a sturdy frame from thick- walled tubing of at least 70 x 70 x 5 mm.