Raven SC1 страница 5 Скачать руководство пользователя | Manualshive

Страница: 5 / 42

background image

CHAPTER

1

Important Information: Safety

1

CHAPTER 1

IMPORTANT INFORMATION

SAFETY

Follow the operation and safety instructions included with the implement and/or controller and read this manual

carefully before installing or operating this Raven system.
• Follow all safety information presented within this manual. Review implement operation with your local dealer.
• Contact a local Raven dealer for assistance with any portion of the installation, service, or operation of Raven

equipment.

• Follow all safety labels affixed to system components. Be sure to keep safety labels in good condition and

replace any missing or damaged labels. Contact a local Raven dealer to obtain replacements for safety labels.

Observe the following safety measures when operating the implement after installing this Raven system:
• Do not operate this Raven system or any agricultural equipment while under the influence of alcohol or an

illegal substance.

• Be alert and aware of surroundings and remain in the operator seat at all times when operating this Raven

system.

•

Do not operate the implement on any public road with this Raven system enabled.

•

Disable this Raven system before exiting the operator seat.

•

Determine and remain a safe working distance from obstacles and bystanders. The operator is

responsible for disabling the system when a safe working distance has diminished.

•

Disable this Raven system prior to starting any maintenance work on the implement or components

of this Raven system.

• Do not attempt to modify or lengthen any of the system control cables. Extension cables are available from a

local Raven dealer.

DISPLAYS AND CONTROL CONSOLES

• If the display will not be used for an extended period, it is best to remove the display from the machine and

store it in a climate controlled environment. This may help to extend the service life of electronic components.

• To prevent theft, secure the display and GPS antenna when leaving the machine unattended.

NOTICE

«
...
3
4
5
6
7
...
»

Содержание SC1











































Отзывы:

Нет отзывов

Похожие инструкции для SC1

Бренд: Onn Страницы: 11

ETR 2000 series

Бренд: Delco Страницы: 34

Бренд: Belson Страницы: 34

Бренд: Sharp Страницы: 40

Бренд: LG Страницы: 24

Бренд: LG Страницы: 30

Бренд: LG Страницы: 24

Бренд: LG Страницы: 37

Бренд: LG Страницы: 32

Бренд: LG Страницы: 28

Бренд: LG Страницы: 4

Бренд: LG Страницы: 63

Бренд: LG Страницы: 32

Бренд: LG Страницы: 73

Бренд: LG Страницы: 44

Бренд: LG Страницы: 22

Бренд: LG Страницы: 38

Бренд: LG Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды