Raven SC1 страница 6 Скачать руководство пользователя | Manualshive

Страница: 6 / 42

background image

CHAPTER 1

2

SC1™/TC1 Twin Disc Implement Steer Installation Manual

HYDRAULIC SAFETY

When installing or servicing a hydraulic system or hydraulic components, be aware that hydraulic fluid may be

extremely hot and under high pressure. Caution must be exercised.
• Always wear appropriate personal protective equipment when installing or servicing hydraulic systems.
• Never attempt to open or work on a hydraulic system with the implement running.
• Any work performed on the hydraulic system must be done in accordance with the machine manufacturer’s

approved maintenance instructions.

• Care should always be taken when servicing or opening a system that has been pressurized.
• The implement or machine must remain stationary and switched off with booms or implement sections

unfolded and supported during installation or maintenance.

• Take precautions to prevent foreign material or contaminants from being introduced into the implement’s

hydraulic system. Contaminants that are able to bypass the hydraulic filtration system will reduce performance

and may damage hydraulic components.

• Stand clear of the implement when starting the system for the first time after installing or servicing hydraulic

components in case a hose has not been properly connected or tightened.

To avoid tripping and entanglement hazards, route cables and harnesses away from walkways, steps, grab bars,

and other areas used by the operator or service personnel when operating or servicing the equipment.

ELECTRICAL SAFETY

• Always verify that power leads are connected to the correct polarity as marked. Reversing the power leads

could cause severe damage to the Raven system or other components.

• To prevent personal injury or fire, replace defective or blown fuses with only fuses of the same type and

amperage.

• Do not connect the power leads to the battery until all system components are mounted and all electrical

connections are completed.

• To avoid tripping and entanglement hazards, route cables and harnesses away from walkways, steps, grab bars,

and other areas used by the operator or service personnel when operating or servicing the equipment.

TOUCH SCREEN

• Only touch the touch-screen with your finger or by using a special touch-screen stylus/pen. Operating the

touch-screen with sharp objects may cause permanent damage to the screen.

• Only clean the screen using a damp cloth. Never use caustic or other aggressive substances.

WARNING

CAUTION

«
...
4
5
6
7
8
...
»

Содержание SC1











































Отзывы:

Нет отзывов

Похожие инструкции для SC1

Бренд: texet Страницы: 28

Бренд: Elkay Страницы: 2

HOF14AFRQ 1F Series

Бренд: Halsey Taylor Страницы: 4

Бренд: WaterGroup Страницы: 24

Бренд: Balboa Страницы: 2

SmartPilot X-5 ST6002 Controller

Бренд: Raymarine Страницы: 2

Бренд: Curtis Страницы: 1

Бренд: Suzuki Страницы: 150

Бренд: Sharp Страницы: 72

EUREKA FORBES NEO

Бренд: Aquaguard Страницы: 4

STAR Pure DSD DAC

Бренд: HQ Audio Страницы: 20

Chemical-Free Water Conditioner NONE

Бренд: P3 International Страницы: 1

Бренд: INDUSTRIAL WATER EQUIPMENT Страницы: 13

RR950 RETRO JUKEBOX

Бренд: Recatech Страницы: 25

Бренд: Teac Страницы: 16

Бренд: sylber Страницы: 36

Бренд: Aiwa Страницы: 21

Бренд: H2O Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды