Raven Electronics Corporation
4655 Longley Lane
Reno, NV 89502
Page 9 of 10
3 Advanced Setup
3.1 Telnet Configuration
Additional parameters can be set via a telnet session. Use a telnet client such as putty (
) or use the
Windows Telnet client. These settings are considered to be advanced and used in fewer voting environments. Use
with some caution or contact Raven for assistance. User credentials follow the same as configured through the web
interface.
Users can read or set configuration values using the following telnet commands (
note that paths are case sensitive!
):
setConfig
– sets a value according to the tables below.
Example:
getConfig
– gets a value according to the tables below.
Example:
Once a setting has been changed, a reboot command (“reboot”) must be initiated or simply power cycle the
device.
