Raven RS1 Скачать руководство пользователя страница 87

Страница: 87 / 100

P/N 016-4010-001 Rev. A

SLINGSHOT

RTK SOURCE SETTINGS

FIGURE 17. RTK Source Screen

The RTK Source screen displays the base station information (if applicable) and allows the operator to choose the

RTK source.

NOTE:

Generally, the RTK Source setting should be set to “Auto”. However, this setting may be locked to a

“Serial” setting if the RTK is provided via a non-Raven source. This setting may be switched based on

location or customer.

NOTE:

If RTK has not been unlocked in the RS1 unit, this tab will display “RTK Is Not Unlocked” and this

feature will not be available until an unlock code for RTK is entered into the system.

• Network - Select if the source is provided via the Slingshot server, either through Ethernet or cellular receiver.
• Serial - Select if the source is provided via serial input to the RS1 unit.

NOTE:

If multiple RTK over CAN devices are present in the system, use this setting to turn off a source to

reduce CAN bandwidth.

FEATURE UNLOCKS

FIGURE 18. Feature Unlock Screen

The integrated Slingshot modem is unlocked via the Feature Unlocks screen. To unlock the Slingshot modem:

Содержание RS1




































































































Результаты поиска

Содержание RS1

Отзывы:

Похожие инструкции для RS1

Бренды по названию

Популярные бренды

Raven RS1, Калибровка и руководство по эксплуатации

Результаты поиска

Содержание RS1

Отзывы:

Похожие инструкции для RS1

Бренды по названию

Популярные бренды