Raven RS1 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 100

background image

CHAPTER

1

P/N 016-4010-001 Rev. A

1

CHAPTER 1

IMPORTANT SAFETY

INFORMATION

Read this manual and the operation and safety instructions included with your implement and/or controller

carefully before installing the Raven RS1™ guidance and steering system.
• Follow all safety information presented within this manual.
• If you require assistance with any portion of the installation or service of your Raven equipment, contact your

local Raven dealer for support.

• Follow all safety labels affixed to the RS1 system components. Be sure to keep safety labels in good condition

and replace any missing or damaged labels. To obtain replacements for missing or damaged safety labels,

contact your local Raven dealer.

When operating the machine after installing RS1, observe the following safety measures:
• Be alert and aware of surroundings.
• Do not operate RS1 or any agricultural equipment while under the influence of alcohol or an illegal substance.
• Remain in the operator’s position in the machine at all times when RS1 is engaged.
• Disable RS1 when exiting the operator’s seat and machine.
• Do not drive the machine with RS1 enabled on any public road.
• Determine and remain a safe working distance from other individuals. The operator is responsible for disabling

RS1 when the safe working distance has diminished.

• Ensure RS1 is disabled prior to starting any maintenance work on the system or the machine.

• Carefully read and follow all safety requirements and precautions contained in this manual and the machine-

specific Installation Manual. Failure to follow safety instructions may lead to equipment damage, personal

injury, or death.

• When starting the machine for the first time after installing RS1, be sure that all persons stand clear in case a

hose has not been properly tightened.

• The machine must remain stationary and switched off during RS1 installation or maintenance.

NOTICE

WARNING

CAUTION

«
...
3
4
5
6
7
...
»

Содержание RS1





































































































Отзывы:

Нет отзывов

Похожие инструкции для RS1

BOLERO40 Series

Бренд: Lantronix Страницы: 37

eXplorist 400 - Wilderness Bundle

Бренд: Magellan Страницы: 108

Бренд: ALK Страницы: 56

Бренд: Nextar Страницы: 1

Бренд: LIGHTNING GPS Страницы: 2

Бренд: FineDigital Страницы: 44

TRAXALL 620: TRAXALL 501: TRAXALL 500:

Бренд: CDI Страницы: 32

Бренд: Nokia Страницы: 120

Бренд: Magellan Страницы: 51

Бренд: Canarmor Страницы: 4

Бренд: Eagle Страницы: 36

Бренд: Eagle Страницы: 89

Бренд: Tait Страницы: 2

Earthmate GPS PN-60

Бренд: DeLorme Страницы: 109

Бренд: Traffic Logix Страницы: 27

Sky Connect Series

Бренд: EMS Страницы: 70

Бренд: BOX Telematics Страницы: 37

Бренд: UniTraQ Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды