Raven RFMOW V2, Руководство пользователя

Страница: 9 / 33

CHAPTER 2 INSTALLING and SETTING UP THE UNIT
NT CONFIGURATION
The interconnections between the RFMOW V2 and the RFMOW system must be made as follows:
1. The COMSEC device interface cables within the RFMOW V2 must be connected to the KIV-7. For
KIV-7HSB, mount the 41875 Adapter Board on the back of the COMSEC device.
2. If an external PC/Controller is used, the PC’s COM1 and COM2 must be connected to the RFMOW
V2 ports J6 and J4, respectively.
3. The Secure Voice Unit (SVU) is connected to the RFMOW V2 via J1 on the rear panel.
4. The interconnection between the Control Modem and the RFMOW V2 is made via the J2 and J5
connectors on the rear panel.
** *
RFMOW MODEM
Data Control
Optional External COMPUTER
(only used in “IU Mode”)
SVU
RFMOW V2
J4 J6
J1
J2 J5
**
*
- J8 on SDM-100
- Data I/O on SDM-300A
- J5 on SLM-8650
- J6 on SDM-100/300A
- J2 on SLM-8650
Modem Legend
7