13
Tools Menu
The following sections offer an overview of the
Tools Menu
and some of the
features available within the System, GPS, Computer, Vehicle, and Setup Wizard
menus.
Quick Access Bar
While working in the
Tools Menu
, the
Quick Access Bar
remains at the top of
the screen and allows access to the Setup Wizard, System, GPS, Computer, and
Vehicle menus.
Touch the Show All icon to view all available menus within the
Tools Menu
.
Setup Wizard Menu
Touch the Setup Wizard Menu icon in the
Quick Access Bar
to display the
available Setup Wizards. The Setup Wizards may be used to step through
calibration of the field computer for a new machine or implement similar to the
Initial Setup Wizard.
For more information or help completing the Setup Wizards, see the
Envizio Pro
Series Installation and Operation Manual
.
System
Access the System menu to set up the product control system, or configure the
optional AccuBoom, AutoBoom or SmarTrax systems. The System menu also
contains the setup screens for the on-screen or external light bar.
To Retry the CANbus Connection:
If the field computer does not recognize CAN nodes when the computer is first
powered up, the CANbus connection may need to be restarted.
1. From the
Home
screen, touch
.
2. When prompted, touch the
to confirm and retry CANbus communication.
If CANbus communication is not re-established, refer to the
Envizio Pro Series
Installation and Operation Manual
for troubleshooting information and assistance.
